LLJLogoHeader
OrderOnlineNow


HomeButton EventsAboutUsLocations ContactUs

Toro Logo

Stump Grinders STX-26 and STX-38

Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. Wet, hilly terrain won't stop you from accessing tough jobs year-round with an STX stump grinder. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping no adjusting tension - guaranteeing optimal performs time after time.

stx26

STX-26 Features
Easy-to-use controls
Fits easily through standard 36" (91 cm) gates
Track drive increases hill-side stability
Toro exclusive traction control system similar to Dingo TX and TRX trenchers
 
The Toro® STX-38 Stump Grinder is built for outstanding durability in the toughest conditions. Fully hydraulic operation means no chance of expensive belts breaking or slipping and no tension adjustments. The Inteli-Sweep feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won't bog down the engine. And with easy-to-use TX-style controls and tracks for maneuverability and stability, the STX-38 is extremely operator-friendly. Best of all, ground speeds of 4.5 mph allow you to spend more time grinding — and less time transporting the machine — for greater productivity.
STX38STX-38 Features
Inteli-Sweep feature automatically adjusts sweep speed based on load on the wheel to maintain optimal operation
Hi-drive track system provides superior climbing capability, maneauverability, and greater hillside stability
34" machine width - easily fits through 36"gates
All-hydraulic sweep control valve facilitates side-to-side feathering for superior stump grinding
  STX-26 STX-38
Engine
26 hp Kawasaki® Twin Cylinder
Kohler® Command PRO® CV980 980cc 38 hp 4-cycle gasoline air-cooled engine
Hydraulics
13.5
gpm hydraulic flow to head
Dual hydrostatic traction drive – 16 cc hydropumps with 15 gpm max flow to each side; 20 gpm gear pump flow to the piston motor driving the cutter head
Wheel
Diameter 19" to tooth,
3/4" thick, 12 teeth
22.25" diameter to tooth; 1" thick; 16 Greenteeth cutting teeth
Cutter Depth
12 1/2" below grade
18" below grade
Cutter Height
33" above grade
35" above grade
Head Swing
47" Arc
52" radius x 60˚ sweep arc
Dimensions
34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) H
34" (86 cm) W x 95" (241 cm) L (transport) x 51" (130 cm) H
Weight
1200 lbs
1750 lb (794 Kg)