Toro Dingo TX 525 Narrow Track

LIMITED-TIME saving on all Toro Dingo TX 525 narrow tracked units!

$500 OFF the retail price
PLUS you’ll receive a FREE TX Platform ($915 value)

Promotion Expires on July 31, 2020

Demo a Dingo TX 525

Experience the productivity of the Toro Dingo TX 525 during an in-person demonstration.
Click on the button below to request your personal demo today.

Dingo TX 525 Narrow Track

  • 25 HP (18.6 kW) Kubota® engine
  • 87.6 cm width with bucket
  • Turf friendly at only 907 kg
  • Patented, easy-to-use traction control system
Diesel. Done Right.
Our diesel Dingo TX models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. The TX 525 offers amazing hydraulic power, delivering 52.2 L/min and pumping 17.9 kW (24 hp) to the attachments, yet has a ground pressure as low as 0.36 bar (5.2 psi). And because they’re part of the full-line family, these diesels are compatible with all of Toro’s compact utility loader attachments.

4-Pump Hydraulic System
4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!

Exclusive TX Track Drive
Low centre of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tyre ruts and flat tyres.

Liquid-Cooled Diesel Engine
The 18.6 kW (25 hp) Kubota diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require.

Compact Size
Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labour. Plus it provides zero radius turn capability for unmatched manoeuvrability.

Hydraulic Power
Up to 34 L/min at 207 bar hydraulic system gives you incredible hydraulic power to auger up to 76 cm holes or trench 91 cm deep.

Simple Controls
You’re up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms – all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.

25 HP (18.6 kW) Engine Kubota®

Ground Clearance
11.7 cm

Ground Speed
0 to 4.0 mph fwd, 0 to 2 mph rev.

Hinge Pin Height
167.1 cm

179.6 cm

Loader Hydraulic System
Joystick control for all functions

Reservoir Capacity
40 litres

15 cm Kevlar reinforced rubber

Product – One Year* / Engine – Two Year*

85.6 cm

*See your local dealer for warranty details.

43.2 L/min

Ground Pressure
0.36 bar (5.2 psi)

117.1 cm

Hydraulic System Pressure
207 bar relief

Loader Arm Flow
22.7 L/min

Operating Capacity
251 kg

Tip Capacity
716.7 kg

Traction Flow
64 L/min

864 kg

Ride-On Platform
Quickly and easily bolted on to any Toro Dingo TX model (except TX 413), this ride-on platform helps minimise operator fatigue – especially in applications requiring a lot of hauling and covering substantial distances.

Dingo Light Kit
Make night and dark work places, shine.

Aggressive Tread Tracks
Make those difficult job site conditions easier to manoeuvre with this aggressive track option.

TX Platform

Quickly and easily bolted on to any Toro Dingo TX model, this ride-on platform helps minimize operator fatigue – especially in applications requiring a lot of hauling and covering substantial distances. A special pivot point lets the platform flow up and down with the terrain, adding to operator comfort and safety. The platform can be flipped up – out of the way – any time the operator wishes.

Contact Us

(303) 320-1270
Leo Degenstein
The Dingo Man
4700 Holly St.
Denver, CO 80216
(720) 641-3880
Chuck Byrnes
4700 Holly St.
Denver, CO 80216
(720) 641-4371